See which machine is falling behind. While you can still fix it.
Machine monitoring and visual inspection for make-to-order factories. One camera per machine counts the work and checks the parts.
Request a pilot
Machine monitoring and visual inspection for make-to-order factories. One camera per machine counts the work and checks the parts.
Request a pilotAt 17:00 the spreadsheet tells you what went wrong at 09:30.
By then the order is late, the parts are cut, and the only thing left is the explanation.
Sample day. Every number here is computed in your browser from example data.
Sample day
Machine monitoring from a camera. Each machine's camera counts finished work. Against the day's target, each station gets one light: on track, at risk, behind. Anyone can read it from across the floor.
See it by station and by shift, and tied to the order that is waiting on it. No sensors, no wiring into the machine.
Visual inspection on the line. The same camera can watch the part. It finds the moment each one is made and asks questions a tired eye stops asking at four in the afternoon.
A cutter does not fail all at once. It wears.
0.1 mm. 0.3. 0.5. Each part still passes. Nobody has a reason to look.
The trend gets there first, so you change the tool before the first bad part.
Illustration of how the trend check works. Not a field result.
Under an hour per station is our target, and we are still proving it.
The models run on a small computer in your factory, not in our cloud.
Built and being proven inside a working door factory in Tekirdağ. We are not claiming accuracy numbers until we have measured them on fixed cameras. We are taking a small number of pilot factories.
FactoryVision is camera-based machine monitoring and visual inspection for make-to-order factories. It has two products. Factory Analytics counts finished work and shows each machine as on track, at risk or behind. Visual QA checks parts as they are made.
No. Counting needs one camera on each machine. For measuring in real millimetres, a printed marker sits in the camera's view.
No. The models run on a small computer in your factory, not in our cloud.
Factories that make discrete parts you can count, such as doors, furniture and metal parts. 10 to 100 machines is where we fit best. Continuous processes such as extrusion are not supported yet.
We do not publish accuracy numbers until we have measured them on fixed cameras. A camera cannot measure finer than about 0.1 mm with sensible optics, and it cannot see defects inside the material.
We are taking a small number of pilot factories. Tell us about your floor using the form on this page.
| Station | Made | Target | Status |
|---|
Tell us about your floor. Discrete parts, 10 to 100 machines is where we fit best.
Google Analytics 4 and Cloudflare Web Analytics count page visits. You can switch them off here.
Status: